B58 Gen 1 Inlet Manifold | Osprey MOTIV REFLEX CONTROLLER:NO software selectable 3k ohm pull-up

software selectable 3k ohm pull-up resistors

can be used as separate outputs or 2 x H-Bridges

CAN Interfaces provide communication to ECU’s or Displays

3/4" barb fittings connect the hoses to the can

Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter

B58 Gen 1 Inlet Manifold | Osprey MOTIV REFLEX CONTROLLER:NO software selectable 3k ohm pull-upThis aluminium inlet manifold is a direct replacement for the stock plastic inlet manifold which allows the use of the stock charge cooler but adds an addional 6 x 1000cc Bosch motorsport injectors which provide enough additional fuel for over 1000hp and allows the user to safely boost more than 34psi safely, as the stock plastic inlet manifold often fails around or above that level. There is a 3 x 1 8th NPT and a 3 8th NPT distribution plate for